| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCP3464T-E/ST bảng dữ liệu(PDF) 77 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP3464T-E/ST bảng dữ liệu(HTML) 77 Page - Microchip Technology |
|
77 / 108 page ![]() 2019-2021 Microchip Technology Inc. DS20006180D-page 77 MCP3461/2/4 7.0 BASIC APPLICATION CONFIGURATION The MCP3461/2/4 devices can be used for various precision Analog-to-Digital Converter applications. The flexibility of its usage is given by the possibility of configuring the ADC to fit the required application. 7.1 Typical Application for Absolute Voltage Measurement One application of MCP3461/2/4 is to measure the signal provided by the sensors with absolute voltage output. For such applications, the MCP3461/2/4 will rely on an external voltage reference. Figure 7-1 provides an example that uses the MCP3464 ADC with MCP1501 external voltage reference. For best perfor- mance, an RC filter and operational amplifier have been placed between the OUT pin of the MCP1501 voltage reference and the REFIN+ input of the MCP3464. FIGURE 7-1: MCP3464 Application Example Schematic. The ADC can be used either in differential or Single-Ended mode, thanks to the internal dual multiplexer (Figure 5-1). The user can select the input connection settings from the MUX register (Section 8.7 “MUX Register”) by using the different settings available on the positive and negative inputs of the ADC. The single-ended configuration is achieved by selecting AGND for the VIN- input of the ADC (MUX[3:0] = 1000) or by selecting any CHn input chan- nel for VIN- and connecting the corresponding CHn input channel to AGND. 7.1.1 HIGH-SIDE AND LOW-SIDE CURRENT SENSING The ADC has the ability to perform differential measurements with analog input Common-mode equal to or slightly larger than AVDD, or equal to or slightly lower than AGND (see the Electrical Characteristics table). The user must use a differential input structure and Kelvin connection to achieve the most accurate measurements. An anti-aliasing filter is required to avoid aliasing of the oversampling frequency (DMCLK) back into the baseband of the input signal and possible corruption of the output data. Figure 7-1 provides an example of an anti-aliasing filter. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |