| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
68HC705JB3 bảng dữ liệu(PDF) 67 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
68HC705JB3 bảng dữ liệu(HTML) 67 Page - Freescale Semiconductor, Inc |
|
67 / 134 page ![]() November 5, 1998 GENERAL RELEASE SPECIFICATION MC68HC05JB3 16-BIT TIMER MOTOROLA REV 1 9-11 IEDG - INPUT CAPTURE EDGE SELECT The state of this read/write bit determines whether a positive or negative transi- tion on the TCAP pin triggers a transfer of the contents of the timer register to the input capture register. Reset has no effect on the IEDG bit. 1 = Positive edge (low to high transition) triggers input capture. 0 = Negative edge (high to low transition) triggers input capture. 9.6 TIMER STATUS REGISTER (TSR) The timer status register (TSR) shown in Figure 9-13 contains flags for the follow- ing events: • An active signal on the PB0/TCAP pin, transferring the contents of the timer registers to the input capture registers. • A match between the 16-bit counter and the output compare registers • An overflow of the timer registers from $FFFF to $0000. Writing to any of the bits in the TSR has no effect. Reset does not change the state of any of the flag bits in the TSR. ICF - INPUT CAPTURE FLAG The ICF bit is automatically set when an edge of the selected polarity occurs on the PB0/TCAP pin. Clear the ICF bit by reading the timer status register with the ICF set, and then reading the low byte (ICRL, $0015) of the input capture registers. Reset has no effect on ICF. OCF - OUTPUT COMPARE FLAG The OCF bit is automatically set when the value of the timer registers matches the contents of the output compare registers. Clear the OCF bit by reading the timer status register with the OCF set, and then accessing the low byte (OCRL, $0017) of the output compare registers. Reset has no effect on OCF. OCF status will be latched to the output of OCMP (PC0 pin) if the OCMPO bit is set to “1” (bit7 at $06). TOF - TIMER OVERFLOW FLAG The TOF bit is automatically set when the 16-bit timer counter rolls over from $FFFF to $0000. Clear the TOF bit by reading the timer status register with the TOF set, and then accessing the low byte (TMRL, $0019) of the timer registers. Reset has no effect on TOF. BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0 TSR R ICF OCF TOF 00000 $0013 W reset: U U U 00000 U = UNAFFECTED BY RESET Figure 9-13. Timer Status Registers (TSR) Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |