SSD1963QL9R datasheet(42/93 Pages) ETC2

42 / 93 page

Solomon Systech

Jan 2010

P 42/93

Rev 1.1

SSD1963

9.29 read_memory_continue

Command

0x3E

Parameters

None

D/C

Hex

Command

Description

Read image data from the SSD1963 to host processor continuing after the last read_memory_continue (0x3E) or

read_memory_start (0x2E).

If set_address_mode (0x36) A[5] = 0:

Pixels are read continuing from the pixel location after the read range of the previous read_memory_start (0x2E) or

read_memory_continue (0x3E). The column address is then incremented and pixels are read from the frame buffer until

the column address equals the End Column (EC) value. The column address is then reset to SC and the page address is

incremented. Pixels are read from the frame buffer until the page address equals the End Page (EP) value and the column

address equals the EC value, or the host processor sends another command.

If set_address_mode (0x36) A[5] = 1:

Pixels are read continuing from the pixel location after the read range of the previous read_memory_start (0x2E) or

read_memory_continue (0x3E). The page address is then incremented and pixels are read from the frame buffer until the

page address equals the End Page (EP) value. The page address is then reset to SP and the column address is

incremented. Pixels are read from the frame buffer until the column address equals the End Column (EC) value and the

page address equals the EP value, or the host processor sends another command.

SSD1963QL9R bảng dữ liệu(PDF) 42 Page - List of Unclassifed Manufacturers