SSD1963QL9R datasheet(23/93 Pages) ETC2

23 / 93 page

SSD1963

Rev 1.1

P 23/93

Jan 2010

Solomon Systech

Hex Code

Command

Description

0xCD

get_gpio2_rop

Get the GPIO2 properties with respect to the LCD signal

generators.

0xCE

set_gpio3_rop

Set the GPIO3 with respect to the LCD signal generators

using ROP operation. No effect if the GPIO3 is configured as

general GPIO.

0xCF

get_gpio3_rop

Get the GPIO3 properties with respect to the LCD signal

generators.

0xD0

set_dbc_conf

Set the dynamic back light configuration

0xD1

get_dbc_conf

Get the current dynamic back light configuration

0xD4

set_dbc_th

Set the threshold for each level of power saving

0xD5

get_dbc_th

Get the threshold for each level of power saving

0xE0

set_pll

Start the PLL. Before the start, the system was operated with

the crystal oscillator or clock input

0xE2

set_pll_mn

Set the PLL

0xE3

get_pll_mn

Get the PLL settings

0xE4

get_pll_status

Get the current PLL status

0xE5

set_deep_sleep

Set deep sleep mode

0xE6

set_lshift_freq

Set the LSHIFT (pixel clock) frequency

0xE7

get_lshift_freq

Get current LSHIFT (pixel clock) frequency setting

0xE8

Reserved

0xE9

Reserved

0xF0

set_pixel_data_interface

Set the pixel data format of the parallel host processor

interface

0xF1

get_pixel_data_interface

Get the current pixel data format settings

0xFF

Reserved

SSD1963QL9R bảng dữ liệu(PDF) 23 Page - List of Unclassifed Manufacturers

SSD1963QL9R bảng dữ liệu(HTML) 23 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

bảng dữ liệu tải về

Link URL