ST7MC1K2 datasheet(166/371 Pages) STMICROELECTRONICS

tên linh kiện	ST7MC1K2

Giải thích chi tiết về linh kiện	Clock, reset and supply management

PDF	371 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

166 / 371 page

Obsolete

Product(s)

- Obsolete

Product(s)

On-chip peripherals

ST7MC1K2-Auto, ST7MC1K6-Auto, ST7MC2S4-Auto, ST7MC2S6-Auto

166/371

Three registers are used internally to manage the auto-update of the LIN divider (LDIV):

●

LDIV_NOM (nominal value written by software at LPR/LPFR addresses).

●

LDIV_MEAS (results of the field synch measurement).

●

LDIV (used to generate the local baud rate).

The control and interactions of these registers is explained in Figure 70 and Figure 71. It

depends on the LDUM bit setting (LIN divider update method)

Note:

As explained in Figure 70 and Figure 71, LDIV can be updated by two concurrent actions: a

transfer from LDIV_MEAS at the end of the LIN sync field and a transfer from LDIV_NOM

due to a software write of LPR. If both operations occur at the same time, the transfer from

LDIV_NOM has priority.

Figure 70.

LDIV read/write operations when LDUM = 0

MANT(7:0)

LDIV

FRAC(3:0)

LDIV_NOM

Baud rate generation

Read LPR

Write LPFR

Update

at end of

synch field

FRAC(3:0)

MANT(7:0)

LDIV_MEAS

FRAC(3:0)

MANT(7:0)

Write LPR

Read LPFR

LIN sync field

measurement

Write LPR

Obsolete

Product(s)

- Obsolete

Product(s)

ST7MC1K2 bảng dữ liệu(PDF) 166 Page - STMicroelectronics

ST7MC1K2 bảng dữ liệu(HTML) 166 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL