AR0134CSSC00SUEAH-GEVB datasheet(7/41 Pages) ONSEMI

7 / 41 page

AR0134_DS Rev. G Pub. 6/15 EN

©Semiconductor Components Industries, LLC,2015.

AR0134: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor

Features Overview

processing signal chain (which provides further data path corrections and applies digital

gain). The pixel data are output at a rate of up to 74.25 Mp/s, in parallel to frame and line

synchronization signals.

Features Overview

The AR0134 Global Sensor shutter has a wide array of features to enhance functionality

and to increase versatility. A summary of features follows. Please refer to the AR0134

Developer Guide for detailed feature descriptions, register settings, and tuning guide-

lines and recommendations.

•Operating Modes

The AR0134 works in master (video), trigger (single frame), or Auto Trigger modes. In

master mode, the sensor generates the integration and readout timing. In trigger

mode, it accepts an external trigger to start exposure, then generates the exposure and

readout timing. The exposure time is programmed through the two-wire serial inter-

face for both modes. Trigger mode is not compatible with the HiSPi interface.

•Window Control

Configurable window size and blanking times allow a wide range of resolutions and

frame rates. Digital binning and skipping modes are supported, as are vertical and

horizontal mirror operations.

•Context Switching

Context switching may be used to rapidly switch between two sets of register values.

Refer to the AR0134 Developer Guide for a complete set of context switchable regis-

ters.

•Gain

The AR0134 Global Shutter sensor can be configured for analog gain of up to 8x, and

digital gain of up to 8x.

•Automatic Exposure Control

The integrated automatic exposure control may be used to ensure optimal settings of

exposure and gain are computed and updated every other frame. Refer to the AR0134

Developer Guide for more details.

•HiSPi

The AR0134 Global Shutter image sensor supports two or three lanes of Streaming-SP

or Packetized-SP protocols of ON Semiconductor's High-Speed Serial Pixel Interface.

•PLL

An on chip PLL provides reference clock flexibility and supports spread spectrum

sources for improved EMI performance.

•Reset

The AR0134 may be reset by a register write, or by a dedicated input pin.

•Output Enable

The AR0134 output pins may be tri-stated using a dedicated output enable pin.

•Temperature Sensor

The temperature sensor is only guaranteed to be functional when the AR0134 is

initially powered-up or is reset at temperatures at or above 0°C.

• Black Level Correction

•Row Noise Correction

• Column Correction

• Test Patterns

Several test patterns may be enabled for debug purposes. These include a solid color,

color bar, fade to grey, and a walking 1s test pattern.

AR0134CSSC00SUEAH-GEVB bảng dữ liệu(PDF) 7 Page - ON Semiconductor

AR0134CSSC00SUEAH-GEVB bảng dữ liệu(HTML) 7 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

bảng dữ liệu tải về

Link URL