UM0851 datasheet(16/245 Pages) STMICROELECTRONICS

16 / 245 page

Boot loader overview

UM0851

16/245

Doc ID 16604 Rev 2

# make

/* Build U-Boot for SPEAr320 target */

# make spear320_config

Generating include/autoconf.mk

Configuring for spear320 board...

# make

The U-Boot source can be compiled with various options, which are listed below:

●

make CONSOLE=USB: This option generates firmware binary image (containing TTY

over USB driver) to be downloaded for the operation of the Flashing Utility (refer to the

Section 11: Flashing utility section).This option is available for SPEAr3xx and

SPEAr600.

●

make ENV=NAND: This option generates U-Boot/firmware image which saves

environment variables in NAND device. This option is available for SPEAr3xx and

SPEAr600.

●

make FLASH=PNOR: This option generates an image that supports parallel NOR in

place of serial NOR Flash drivers. It is applicable only for SPEAr310.

1.2.4

U-Boot commands

You can display the complete list of U-Boot commands using the 'help' command.

spear600> help

- alias for 'help'

autoscr - run script from memory

base

- print or set address offset

bdinfo

- print Board Info structure

boot

- boot default, for example, run 'bootcmd'

bootd

- boot default, for example, run 'bootcmd'

bootm

- boot application image from memory

bootp

- boot image via network using BootP/TFTP protocol

cdp

- Perform CDP network configuration

cmp

- memory compare

coninfo - print console devices and information

- memory copy

crc32

- checksum calculation

dhcp

- invoke DHCP client to obtain IP/boot params

echo

- echo args to console

erase

- erase FLASH memory

flinfo

- print FLASH memory information

- start application at address 'addr'

help

- print online help

i2c

- I2C sub-system

iminfo

- print header information for application image

imls

- list all images found in flash

itest

- return true/false on integer compare

loadb

- load binary file over serial line (kermit mode)

loads

- load S-Record file over serial line

loady

- load binary file over serial line (ymodem mode)

loop

- infinite loop on address range

- memory display

- memory modify (auto-incrementing)

mtest

- simple RAM test

- memory write (fill)

nand

- NAND sub-system

nboot

- boot from NAND device

nfs

- boot image via network using NFS protocol

- memory modify (constant address)

UM0851 bảng dữ liệu(PDF) 16 Page - STMicroelectronics

UM0851 bảng dữ liệu(HTML) 16 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL