UM0851 datasheet(72/245 Pages) STMICROELECTRONICS

72 / 245 page

Communication device drivers

UM0851

72/245

Doc ID 16604 Rev 2

.ioctl = spear_ioctl,

};

/* endpoint specific operations exported by usbd driver */

static struct usb_ep_ops spear_udc_ep_ops = {

.enable = spear_ep_enable,

.disable = spear_ep_disable,

.alloc_request = spear_ep_alloc_request,

.free_request = spear_ep_free_request,

.queue = spear_ep_queue,

.dequeue = spear_ep_dequeue,

.set_halt = spear_ep_set_halt,

.fifo_status = spear_ep_fifo_status,

.fifo_flush = spear_ep_fifo_flush,

};

/* routine exported by usbd driver for gadgets to register */

int usb_gadget_register_driver(struct usb_gadget_driver *driver);

/* routine exported by usbd driver for gadgets to un-register */

int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);

The composite device layer registers to the gadget framework by calling the above APIs and

exposes an interface which can be used by different functions (gadgets) to represent a

composite device.

4.4.4

Composite device interface

The composite device is designed in such way that, the driver should first register to the

composite layer. During registration, it passes some of the device related details (device,

string descriptor) to the composite layer. After that, the composite device needs to add

configuration (multiple is also possible) and then individual functions can add their

interfaces.

The following figure shows a simple gadget driver ("zero gadget") available with SPEAr LSP.

This gadget driver is build over a composite layer (although it is not a composite device) and

is mainly used for testing the USB Device controller. It provides two configurations: in the

first one, a source/sink function generating/consuming USB packets, and in the second one,

loop back feature.

We refer to this example gadget driver in the explanations given throughout this part of the

document. This driver can be found in linux/drivers/usb/gadget/zero.c.

Figure 17.

Zero gadget device

Source/Sink Config

Zero gadget device

Loop back Config

Function 1

Interface 0

Function 1

OUT Endpoint

IN Endpoint

UM0851 bảng dữ liệu(PDF) 72 Page - STMicroelectronics

UM0851 bảng dữ liệu(HTML) 72 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL