UM0225 datasheet(41/57 Pages) STMICROELECTRONICS

tên linh kiện	UM0225

Giải thích chi tiết về linh kiện	Configuration and programming software

PDF	57 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

41 / 57 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

UM0225

3 Designing with CAPS

40/56

Figure 36. Hardware setup dialog

Use the drop-down menu to choose the type of communication link (RLink or FlashLINK)

connected between the PC and target board.

If FlashLINK is selected, also click Parallel Port and choose Auto Select or the LPT port

from the drop-down menu.

Check the Always monitor RTCK checkbox to use the RTCK to pace the TCK clock

frequency, from the external JTAG test equipment.

Note:

Using RTCK requires another connector pin.

Click the FlashLINK Connect Test button or the RLink Connect Test button, as

applicable, to confirm connectivity between your PC and the target board.

The dialog shown in Figure 37.: Link connectivity test dialog appears, showing the

preliminary steps required before continuing.

Figure 37. Link connectivity test dialog

When you are ready, click OK to continue. If the test passes, a success message is

displayed. Click OK to continue.

RLink

Communication using a USB port.

FlashLINK

Communication using a parallel port.

UM0225 bảng dữ liệu(PDF) 41 Page - STMicroelectronics