UM0225 datasheet(40/57 Pages) STMICROELECTRONICS

40 / 57 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

3 Designing with CAPS

UM0225

39/56

Figure 35. Create ATE File dialog

The description frame on the right of the dialog provides a context-sensitive help for the various

selection options.

Click the OK button to accept the specified file format. A browser dialog window appears,

allowing you to enter the file name and directory location to save the file.

Click the Save button. The file is saved to disk and “Successful ATE file creation ...”

displays in the output log.

3.7.4

Target hardware verification

Use the programming dialog to perform the following functions

•

Set the target hardware to an initial state.

•

Specify the type of communication link.

•

Perform loopback tests on the link and validate target board connectivity.

•

List the IDCODEs of all devices in the JTAG chain.

Click the HW Setup button to display the hardware setup dialog shown in Figure 36.: Hardware

setup dialog.

Note: 1 The target device and communication links must first be connected and powered, as described

in 1.2: Setting up the target hardware.

2 It is recommended that you reset the target device before performing these operations by

clicking the Reset Target button.

UM0225 bảng dữ liệu(PDF) 40 Page - STMicroelectronics