| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32F407IE bảng dữ liệu(PDF) 97 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F407IE bảng dữ liệu(HTML) 97 Page - STMicroelectronics |
|
97 / 154 page ![]() STM32F405xx, STM32F407xx Electrical characteristics Doc ID 022152 Rev 1 97/154 I2S - SPI interface characteristics Unless otherwise specified, the parameters given in Table 51 for SPI or in Table 52 for I2S are derived from tests performed under the ambient temperature, fPCLKx frequency and VDD supply voltage conditions summarized in Table 10. Refer to Section 5.3.16: I/O port characteristics for more details on the input/output alternate function characteristics (NSS, SCK, MOSI, MISO for SPI and WS, CK, SD for I2S). Table 51. SPI characteristics(1)(2) 1. Remapped SPI1 characteristics to be determined. 2. TBD stands for “to be defined”. Symbol Parameter Conditions Min Max Unit fSCK 1/tc(SCK) SPI clock frequency Master mode - 37.5 MHz Slave mode - 37.5 tr(SCL) tf(SCL) SPI clock rise and fall time Capacitive load: C = 30 pF - 8 ns DuCy(SCK) SPI slave input clock duty cycle Slave mode 30 70 % tsu(NSS) (3) 3. Based on characterization, not tested in production. NSS setup time Slave mode 4 tPCLK - ns th(NSS) (3) NSS hold time Slave mode 2 tPCLK - tw(SCLH) (3) tw(SCLL) (3) SCK high and low time Master mode, fPCLK = 42 MHz, presc = 4 TBD TBD tsu(MI) (3) tsu(SI) (3) Data input setup time Master mode 5 - Slave mode 5 - th(MI) (3) th(SI) (3) Data input hold time Master mode 5 - Slave mode 4 - ta(SO) (3)(4) 4. Min time is for the minimum time to drive the output and the max time is for the maximum time to validate the data. Data output access time Slave mode, fPCLK = 20 MHz 0 3 tPCLK tdis(SO) (3)(5) 5. Min time is for the minimum time to invalidate the output and the max time is for the maximum time to put the data in Hi-Z Data output disable time Slave mode 2 10 tv(SO) (3)(1) Data output valid time Slave mode (after enable edge) - 25 tv(MO) (3)(1) Data output valid time Master mode (after enable edge) - 5 th(SO) (3) Data output hold time Slave mode (after enable edge) 15 - th(MO) (3) Master mode (after enable edge) 2 - |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |