| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
M16C/29 bảng dữ liệu(PDF) 114 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/29 bảng dữ liệu(HTML) 114 Page - Renesas Technology Corp |
|
114 / 499 page ![]() 10. Watchdog Timer p u o r G 9 2 / C 6 1 M page 90 8 5 4 f o 7 0 0 2 , 0 3 .r a M 2 1 . 1 . v e R 2 1 1 0 - 1 0 1 0 B 9 0 J E R Figure 10.2 WDC Register and WDTS Register 10.1 Count Source Protective Mode In this mode, a on-chip oscillator clock is used for the watchdog timer count source. The watchdog timer can be kept being clocked even when CPU clock stops as a result of run-away. Before this mode can be used, the following register settings are required: (1) Set the PRC1 bit in the PRCR register to 1 (enable writes to PM1 and PM2 registers). (2) Set the PM12 bit in the PM1 register to 1 (reset when the watchdog timer underflows). (3) Set the PM22 bit in the PM2 register to 1 (on-chip oscillator clock used for the watchdog timer count source). (4) Set the PRC1 bit in the PRCR register to 0 (disable writes to PM1 and PM2 registers). (5) Write to the WDTS register (watchdog timer starts counting). Setting the PM22 bit to 1 results in the following conditions • The on-chip oscillator continues oscillating even if the CM21 bit in the CM2 register is set to "0" (main clock or PLL clock) (system clock of count source selected by the CM21 bit is valid) • The on-chip oscillator starts oscillating, and the on-chip oscillator clock becomes the watchdog timer count source. • The CM10 bit in the CM1 register is disabled against write. (Writing a 1 has no effect, nor is stop mode entered.) • The watchdog timer does not stop when in wait mode. Watchdog timer period = Watchdog timer count (32768) on-chip oscillator clock Watchdog Timer Start Register Symbol Address After Reset WDTS 000E16 Undefined WO b7 b0 Function RW The watchdog timer is initialized and starts counting after a write instruction to this register. The watchdog timer value is always initialized to 7FFF16 regardless of whatever value is written. Watchdog Timer Control Register Symbol Address After Reset WDC 000F16 00XXXXXX2 Function Bit Symbol RW b7 b6 b5 b4 b3 b2 b1 b0 High-order bits of watchdog timer WDC7 Bit Name Prescaler select bit 0 : Divided by 16 1 : Divided by 128 Reserved bit Set to 0 0 RO RW RW RW (b4-b0) (b6) 0 (b5) Reserved bit Set to 0 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |