| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMPR4938 bảng dữ liệu(PDF) 186 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4938 bảng dữ liệu(HTML) 186 Page - Toshiba Semiconductor |
|
186 / 716 page ![]() Chapter 8 DMA Controller 8-12 8.3.8 Dual Address Transfer This section explains the register settings for Dual Address transfer (DMCCRn.SNGAD = 0). This applies to the following DMA transfer modes. • External I/O (Dual Address) transfer • Internal I/O DMA transfer • Memory-Memory Copy transfer 8.3.8.1 Channel Register Settings During Dual Address Transfer Table 8.3.3 shows restrictions of the Channel Register settings during Dual Address transfer. If these restrictions are not met, then a Configuration Error is detected, the Configuration Error bit (CFERR) of the DMA Channel Status Register (DMCSRn) is set, and DMA transfer is not performed. If the setting of the DMA Source Address Increment Register (DMSAIRn) is negative and the transfer setting size is 8 bytes or larger, then a value will be set in the DMA Source Address Register (DMSARn) that reflects as follows. If the setting of the DMA Source Address Increment Register (DMSAIRn) is negative and the transfer size is 2 bytes or larger, set the DMA Source Address Register (DMSARn) as follows: • If the transfer size is 2 bytes, set the DMSARn with the low-order 1 bit complemented. • If the transfer size is 4 bytes, set the DMSARn with the low-order 2 bits complemented. • If the transfer size is 8 bytes or larger, set the DMSARn with the low-order 3 bits complemented. Likewise, if the setting of the DMA Destination Address Increment Register (DMDAIRn) is negative and the transfer size is 2 bytes or larger, set the DMA Destination Address Register (DMDARn) as follows: • If the transfer size is 2 bytes, set the DMDARn with the low-order 1 bit complemented. • If the transfer size is 4 bytes, set the DMDARn with the low-order 2 bits complemented. • If the transfer size is 8 bytes or larger, set the DMDARn with the low-order 3 bits complemented. Example: When the transfer address is 0x0_0001_0000, the DMA Source Address Register (DMSARn) is as follows below. • DMSAIRn setting is “0” or greater: 0x0_0001_0000 • DMSAIRn setting is a negative value: 0x0_0001_0007 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |