ADC3683 datasheet(22/70 Pages) TI1

22 / 70 page

7.3.3 Voltage Reference

The ADC3683-SP provides three different options for supplying the voltage reference to the ADC. An external

1.6V reference can be directly connected to the VREF input. A voltage 1.2V reference can be connected to

the REFBUF input using the internal gain buffer or the internal 1.2V reference can be enabled to generate a

1.6V reference voltage. For best performance, the reference noise is filtered by connecting a 10µF and a 0.1µF

ceramic bypass capacitor to the VREF pin. The internal reference circuitry of the device is shown in Figure 7-13.

Note

The voltage reference mode can be selected using SPI writes or by using the REFBUF pin (default) as

a control pin (Section 7.5.1). If the REFBUF pin is not used for configuration, the REFBUF pin should

be connected to AVDD (even though the REFBUF pin has a weak internal pullup to AVDD) and the

voltage reference option has to be selected using the SPI interface.

xINP

xINM

VREF

(1.6V)

REFBUF

(1.2V)

REFGND

VREF1.2

VCM

0.95V

x1.33

Figure 7-13. Different Voltage Reference Options for ADC3683-SP

7.3.3.1 Internal Voltage Reference

The 1.6V reference for the ADC can be generated internal using the on-chip 1.2V bandgap reference along with

the internal gain buffer. A 10µF and a 0.1µF ceramic bypass capacitor (CVREF) should be connected between the

VREF and REFGND pins as close to the pins as possible.

xINP

xINM

VREF

(1.6V)

REFBUF

(1.6V)

REFGND

VREF1.2

VCM

0.95V

x1.33

CVREF

Figure 7-14. Internal reference

ADC3683-SP

SBASAB5 – MARCH 2024

www.ti.com

Submit Document Feedback

Product Folder Links: ADC3683-SP

ADC3683 bảng dữ liệu(PDF) 22 Page - Texas Instruments

ADC3683 bảng dữ liệu(HTML) 22 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

bảng dữ liệu tải về

Link URL