| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TSI721 bảng dữ liệu(PDF) 21 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
TSI721 bảng dữ liệu(HTML) 21 Page - Renesas Technology Corp |
|
21 / 67 page ![]() Tsi721 Datasheet 21 April 4, 2016 Integrated Device Technology 2.7 I2C Signals The I2C Interface is used for the following: • As a master, downloading configuration from EEPROM • As a master, allowing the PCIe root complex or the S-RIO host to configure other I2C expansion devices • As a slave, exposing internal register space to an I2C master (Note: To be used for lab debug or another master-driven initialization). 2.8 JTAG and Test Interface Signals Table 5: I2C Signals Name Pin Type Descriptiona a. For information on I2C signals that are used for power-up purposes only, see Power-up Signals. I2C_SCL IO-OD Serial clock for the I2C Interface with a maximum frequency of 100 kHz. I2C_SDA IO-OD Serial data for the I2C Interface. Table 6: JTAG Interface Signals Name Pin Type Description TCK I-PD IEEE 1149.1/1149.6 test access port. Clock input. TDI I-PU IEEE 1149.1/1149.6 test access port. Serial data input TDO O IEEE 1149.1/1149.6 test access port. Serial data output TMS I-PU IEEE 1149.1/1149.6 test access port. Test mode select TRSTn I-PU IEEE 1149.1/1149.6 test access port. Reset input. This input must be asserted during the assertion of RSTn. Thereafter, it can be left in either state. TEST_ON I-PD Test mode pin. Tie low or NC for normal operation. TEST_BCE I-PU Boundary scan compatibility enabled pin. This input aids 1149.6 testing. It must be tied to VDDIO (or NC as there is internal pull up in pad) during normal operation of the device. 0 = JTAG chain includes SerDes registers. SerDes registers are accessible to external JTAG pins. Used during ATE and lab debug of SerDes registers through an external JTAG Controller. 1 = JTAG chain does not include SerDes registers. SerDes register are accessible through the internal register bus for BAR 0 access. TEST_BIDIR_CTL I-PU Test mode pin. Tie high or NC for normal operation. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |