| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM8S005C6 bảng dữ liệu(PDF) 17 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM8S005C6 bảng dữ liệu(HTML) 17 Page - STMicroelectronics |
|
17 / 97 page ![]() DocID022186 Rev 4 17/97 STM8S005C6 STM8S005K6 Product overview 25 Independent watchdog timer The independent watchdog peripheral can be used to resolve processor malfunctions due to hardware or software failures. It is clocked by the 128 kHz LSI internal RC clock source, and thus stays active even in case of a CPU clock failure The IWDG time base spans from 60 µs to 1 s. 4.8 Auto wakeup counter Used for auto wakeup from active halt mode Clock source: Internal 128 kHz internal low frequency RC oscillator or external clock LSI clock can be internally connected to TIM3 input capture channel 1 for calibration 4.9 Beeper The beeper function outputs a signal on the BEEP pin for sound generation. The signal is in the range of 1, 2 or 4 kHz. The beeper output port is only available through the alternate function remap option bit AFR7. 4.10 TIM1 - 16-bit advanced control timer This is a high-end timer designed for a wide range of control applications. With its complementary outputs, dead-time control and center-aligned PWM capability, the field of applications is extended to motor control, lighting and half-bridge driver 16-bit up, down and up/down autoreload counter with 16-bit prescaler Four independent capture/compare channels (CAPCOM) configurable as input capture, output compare, PWM generation (edge and center aligned mode) and single pulse mode output Synchronization module to control the timer with external signals Break input to force the timer outputs into a defined state Three complementary outputs with adjustable dead time Encoder mode Interrupt sources: 3 x input capture/output compare, 1 x overflow/update, 1 x break 4.11 TIM2, TIM3 - 16-bit general purpose timers 16-bit autoreload (AR) up-counter 15-bit prescaler adjustable to fixed power of 2 ratios 1…32768 Timers with 3 or 2 individually configurable capture/compare channels PWM mode Interrupt sources: 2 or 3 x input capture/output compare, 1 x overflow/update |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |