| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MSP430F423IPM bảng dữ liệu(PDF) 12 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
MSP430F423IPM bảng dữ liệu(HTML) 12 Page - Texas Instruments |
|
12 / 59 page ![]() 12 MSP430F427, MSP430F425, MSP430F423 SLAS421B – APRIL 2004 – REVISED NOVEMBER 2016 www.ti.com Submit Documentation Feedback Product Folder Links: MSP430F427 MSP430F425 MSP430F423 Specifications Copyright © 2004–2016, Texas Instruments Incorporated (1) The junction-to-ambient thermal resistance under natural convection is obtained in a simulation on a JEDEC-standard, High-K board, as specified in JESD51-7, in an environment described in JESD51-2a. (2) The junction-to-case (top) thermal resistance is obtained by simulating a cold plate test on the package top. No specific JEDEC- standard test exists, but a close description can be found in the ANSI SEMI standard G30-88. (3) The junction-to-board thermal resistance is obtained by simulating in an environment with a ring cold plate fixture to control the PCB temperature, as described in JESD51-8. 5.5 Thermal Resistance Characteristics, PM Package (LQFP64) PARAMETER VALUE UNIT RθJA Junction-to-ambient thermal resistance, still air(1) 55.7 °C/W RθJC(TOP) Junction-to-case (top) thermal resistance(2) 16.7 °C/W RθJB Junction-to-board thermal resistance(3) 27.1 °C/W ΨJB Junction-to-board thermal characterization parameter 26.8 °C/W ΨJT Junction-to-top thermal characterization parameter 0.8 °C/W 5.6 Schmitt-Trigger Inputs − Ports (P1 and P2), RST/NMI, JTAG (TCK, TMS, TDI/TCLK,TDO/TDI) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VCC MIN MAX UNIT VIT+ Positive-going input threshold voltage 3 V 1.5 1.98 V VIT- Negative-going input threshold voltage 3 V 0.9 1.3 V Vhys Input voltage hysteresis (VIT+ - VIT- ) 3 V 0.45 1 V (1) The external signal sets the interrupt flag every time the minimum t(int) parameters are met. It may be set even with trigger signals shorter than t(int). Both the cycle and timing specifications must be met to ensure the flag is set. t(int) is measured in MCLK cycles. 5.7 Inputs P1.x, P2.x, TAx over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN MAX UNIT t(int) External interrupt timing Port P1, P2: P1.x to P2.x, external trigger signal for the interrupt flag(1) 3 V 1.5 cycle 50 ns t(cap) Timer_A capture timing TAx 3 V 50 ns f(TAext) Timer_A clock frequency externally applied to pin TAxCLK, INCLK t(H) = t(L) 3 V 10 MHz f(TAint) Timer_A clock frequency SMCLK or ACLK signal selected 3 V 10 MHz (1) The leakage current is measured with VSS or VCC applied to the corresponding pins, unless otherwise noted. (2) The port pin must be selected as input. 5.8 Leakage Current − Ports (P1 and P2) (1) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN MAX UNIT Ilkg(P1.x) Leakage current, Port P1.x Port 1: V(P1.x) (2) 3 V ±50 nA Ilkg(P2.x) Leakage current, Port P2.x Port 2: V(P2.x) (2) 3 V ±50 nA |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |