| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MSP430F423IPM bảng dữ liệu(PDF) 11 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
MSP430F423IPM bảng dữ liệu(HTML) 11 Page - Texas Instruments |
|
11 / 59 page ![]() f (MHz) 1.8 V 3.6 V 2.7 V 3 V 4.15 MHz 8 MHz V − Supply Voltage − V CC Supply voltage range with SD16 enabled or during programming of the flash memory Supply voltage range during program execution 6 MHz 11 MSP430F427, MSP430F425, MSP430F423 www.ti.com SLAS421B – APRIL 2004 – REVISED NOVEMBER 2016 Submit Documentation Feedback Product Folder Links: MSP430F427 MSP430F425 MSP430F423 Specifications Copyright © 2004–2016, Texas Instruments Incorporated Figure 5-1. Frequency vs Supply Voltage (1) All inputs are tied to 0 V or VCC. Outputs do not source or sink any current. The current consumption in LPM2, LPM3, and LPM4 are measured with active Basic Timer1 and LCD (ACLK selected). The current consumption of the SD16 and the SVS module are specified in their respective sections. LPMx currents measured with WDT+ disabled. The currents are characterized with a KDS Daishinku DT-38 (6 pF) crystal. (2) Current consumption for brownout is included. 5.4 Supply Current Into AVCC and DVCC Excluding External Current (1) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TA VCC MIN TYP MAX UNIT I(AM) Active mode (AM) f(MCLK) = f(SMCLK) = f(DCO) = 1 MHz, f(ACLK) = 32768 Hz, XTS_FLL = 0, program executes in flash –40°C to 85°C 3 V 400 500 µA I(LPM0) Low-power mode 0 or 1 (LPM0 or LPM1)(2) f(MCLK) = f(SMCLK) = f(DCO) = 1 MHz, f(ACLK) = 32768 Hz, XTS_FLL = 0, FN_8 = FN_4 = FN_3 = FN_2 = 0 –40°C to 85°C 3 V 130 150 µA I(LPM2) Low-power mode 2 (LPM2)(2) –40°C to 85°C 3 V 10 22 µA I(LPM3) Low-power mode 3 (LPM3) (2) –40°C 3 V 1.5 2.0 µA 25°C 1.6 2.1 60°C 1.7 2.2 85°C 2.0 3.5 I(LPM4) Low-power mode 4 (LPM4)(2) –40°C 3 V 0.1 0.5 µA 25°C 0.1 0.5 85°C 0.8 2.5 Current consumption of active mode versus system frequency: I(AM) = I(AM) [at 1 MHz] × f(System) [MHz] Current consumption of active mode versus supply voltage: I(AM) = I(AM) [at 3 V] + 170 µA/V × (VCC – 3 V) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |