| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PM0020 bảng dữ liệu(PDF) 68 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
PM0020 bảng dữ liệu(HTML) 68 Page - STMicroelectronics |
|
68 / 87 page ![]() ISC logic description PM00020 68/87 If sector is not blank checked, the value of the corresponding bits is meaningless. Note: Bit 51 can be used to address the OTP sector only for a blank check operation, the value of this bit is not considered during an Erase operation, in fact the OTP cannot be erased. It is not possible to address the Security bit, OTP, and the CFI (MFG code and ID code) sectors. 12.4.10 Configuration register The Lock bit value stored in the bit 63 can only be shifted out, executing the ISC_CONFIGURATION instruction. It has no impact on the non volatile value of the Lock bit in the Flash sector. 63 0 Configurationr[63:0] rw Bit 63 Lock OTP Bit 62:52 Reserved Bit 51 LVD_WARNING_SELECT Defining the LVD warning signal input source. Bit 50 LVD_RESET_SELECT Defining the LVD reset input source. Bit 49 LVD_th Defining of the threshold of the LVD Bits 48 CSx Mapping of CS0 and CS1 Bits 47:40 Reserved Bits 39:32 Protection Flash Bank 1 sectors Bits 31:0 Protection of Flash Bank 0 sectors |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |