PM0020 datasheet(54/87 Pages) STMICROELECTRONICS

54 / 87 page

Erase and program operation

PM00020

54/87

If OTP sector is selected,

Check if OTP_LOCK bit = “1”,

- If yes, exit with warning

- If no,

(a) upload OTP sector from DUT

(b) copy the last 2 bytes (16 bits)

from uploaded buffer and

overwrite to the program buffer

OTP_LOCK bit, if applicable.

/ Check if OTP_LOCK bit is set

ISC-CONFIGURATION

if OTP_LOCK bit = “1”,

exit with message indicating OTP Lock-bit status

/upload OTP sector from DUT

ISC-READ(OTP Sector)

if read error, exit with error

else copy the last 2 bytes (16 bits) from uploaded buffer

and overwrite to the program buffer

/ program OTP sector

ISC-PROGRAM (OTP Sector, data)

if failed

{

ISC-CLR-STATUS

exit with error

}

/If file has OTP_LOCK bit = “1”, program OTP_LOCK bit

ISC-PROGRAM (Lock-bit Sector, data)

if failed

{

ISC-CLR-STATUS

exit with error

}

If security bit is set (D0=0), program

security-bit

/program security bit

ISC-PROGRAM-SECURITY

if failed

{

ISC-CLR-STATUS

report error and exit

}

Disable ISC mode

ISC-DISABLE

Disable Turbo Programming Mode

Disabling by either power-down or taking JTRSTn to low

Table 26.

Erase and program operation description (continued)

Description

Flow in sequence

PM0020 bảng dữ liệu(PDF) 54 Page - STMicroelectronics

PM0020 bảng dữ liệu(HTML) 54 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

bảng dữ liệu tải về

Link URL