| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
EVAL-ADT7470EBZ bảng dữ liệu(PDF) 13 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
EVAL-ADT7470EBZ bảng dữ liệu(HTML) 13 Page - Analog Devices |
|
13 / 40 page ![]() Data Sheet ADT7470 Rev. E | Page 13 of 40 TEMPERATURE MEASUREMENT USING TMP05/TMP06 MEASURING TEMPERATURE The ADT7470 can be connected with up to 10 daisy-chained TMP05/TMP06 devices for temperature measurement. Each TMP05/TMP06 performs an ambient temperature measure- ment, and outputs a PWM signal. The ADT7470 decodes the PWM into a temperature measurement, and stores the result in the temperature reading registers, listed in Table 7.The maximum temperature read back from all TMP05 temperature readings is stored in register 0x78. To use the ADT7470 with TMP05/TMP06, the parts should be connected as shown in Figure 13. Pin 13 on the ADT7470 should be configured as TMP_START, by setting Configuration Register 1 Bit 7 to Bit 1. (Register address 0x40 Bit[7] =1). The start pulse required by the TMP05/06 will be output on the TMP_START pin. The OUT pin on the last TMP05/06 in the daisy-chain should be connected to Pin 12 on the ADT7470, TMP_IN. For more information on the TMP05/06, refer to the TMP05/TMP06 data sheet. Reporting of 8-bit temperature values occurs only if the TMP_IN function is used and if TMP05/TMP06s are daisy- chained according to their data sheet and connected as shown. The ADT7470 does not have any temperature measurement capability when used as a standalone device without TMP05s and TMP06s connected. Table 7. Temperature Reading Registers Register Reading Default 0x20 Temperature 1 reading 0x00 0x21 Temperature 2 reading 0x00 0x22 Temperature 3 reading 0x00 0x23 Temperature 4 reading 0x00 0x24 Temperature 5 reading 0x00 0x25 Temperature 6 reading 0x00 0x26 Temperature 7 reading 0x00 0x27 Temperature 8 reading 0x00 0x28 Temperature 9 reading 0x00 0x29 Temperature 10 reading 0x00 0x78 Max TMP05 temperature 0x00 TMP05/TMP06 Decoder The ADT7470 includes a PWM processing engine to decode the daisy-chained PWM output from multiple TMP05s and TMP06s. It then passes each decoded temperature value to the temper- ature value registers. This allows the ADT7470 to do high/ low limit comparisons of temperature and to automatically control fan speed based on measured temperature. The PWM processing engine contains all necessary logic to initiate start conversions on the first daisy-chained TMP05/TMP06 and to synchronize with each temperature value as it is fed back to the device through the daisy chain. The start function is multi- plexed onto the same pin that can be used to blast the fans to full speed. The start conversion for TMP05/TMP06 temp- erature measurement is fully transparent to the user and does not require any software intervention to function. NO. 1 CONV/IN OUT NO. 2 CONV/IN OUT NO. 3 NO. n CONV/IN OUT CONV/IN OUT TMP05/ TMP06 TMP05/ TMP06 TMP05/ TMP06 TMP05/ TMP06 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 GND VCC TACH3 TACH2 TACH1 PWM2 SCL PWM1 SMBALERT PWM4 PWM3 TACH4 ADDR TMP_IN SDA ADT7470 FULL_SPEED/TMP_START Figure 13. Interfacing the ADT7470 to Multiple Daisy-Chained TMP05/TMP06 Temperature Sensors |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |