| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MAX2829 bảng dữ liệu(PDF) 31 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAX2829 bảng dữ liệu(HTML) 31 Page - Maxim Integrated Products |
|
31 / 39 page ![]() Single-/Dual-Band 802.11a/b/g World-Band Transceiver ICs ______________________________________________________________________________________ 31 to the VCO drifting to an adjacent sub-band. In this case, it is advisable to reprogram the PLL by either manual or automatic sub-band selection. Programmable Registers The MAX2828/MAX2829 include 13 programmable, 18- bit registers: 0, 1, standby, integer-divider ratio, frac- tional-divider ratio, band select and PLL, calibration, lowpass filter, Rx control/RSSI, Tx linearity/baseband gain, PA bias DAC, Rx gain, and Tx VGA gain. The 14 most significant bits (MSBs) are used for register data. The 4 least significant bits (LSBs) of each register con- tain the register address. Data is shifted in MSB first. The data sent to the devices, in 18-bit words, is framed by CS. When CS is low, the clock is active and data is shifted with the rising edge of the clock. When CS tran- sitions high, the shift register is latched into the register selected by the contents of the address bits. Only the last 18 bits shifted into the device are retained in the shift register. No check is made on the number of clock pulses. For programming data words less than 14 bits long, only the required data bits and the address bits are required to be shifted, resulting in faster Rx and Tx gain control where only the LSBs need to be pro- DATA BIT DEFAULT DESCRIPTION D13 0 MIMO Select. Set to 0 for normal operation. Set to 1 for MIMO applications. D12 1 Set to 1 D11 0 Voltage Reference (Pin 23) D10 0 PA Bias DAC, in Tx Mode D9 0 D8 0 D7 0 D6 0 D5 0 D4 0 D3 0 Set to 0 D2 1 D1 1 D0 1 Set to 1 Table 10. Standby Register (A3:A0 = 0010) DEFAULT ADDRESS REGISTER D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 (A3:A0) TABLE Register 0 01 0 0 01 01 00 00 00 0000 — Register 1 00 0 0 00 11 00 10 10 0001 — Standby 01 0 0 00 00 00 01 11 0010 10 Integer-Divider Ratio 11 0 0 00 10 10 00 10 0011 11 Fractional- Divider Ratio 01 1 1 01 11 01 11 01 0100 12 Band Select and PLL 01 1 0 00 00 10 01 00 0101 13 Calibration 01 1 1 00 00 00 00 00 0110 14 Lowpass Filter 00 0 0 00 00 10 10 10 0111 15 Rx Control/RSSI 00 0 0 00 00 10 01 01 1000 16 Tx Linearity/Base- band Gain 00 0 0 10 00 00 00 00 1001 17 PA Bias DAC 00 0 0 11 11 00 00 00 1010 18 Rx Gain 00 0 0 00 01 11 11 11 1011 19 Tx VGA Gain 00 0 0 00 00 00 00 00 1100 20 Table 9. Register Default/SPI Reset Settings |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |