7733 datasheet(646/940 Pages) RENESAS

646 / 940 page

“Appendix 1.

This applies when the contents of memory allocation selection bits (bits 2 to 0 at

CENTRAL PROCESSING UNIT (CPU)

7735 Group User’s Manual

2–6

2.5 Processor modes

Concerning section “2.5 Processor modes,” the 7735 Group differs from that of the 7733 Group in the

following:

• “Fig. 2.5.1 Memory map in each processor mode”

• “Fig. 2.5.2 Pin configuration in each processor mode (Top view)”

• “Table 2.5.1 Relationship between processor modes and functions of P0 to P4”

_______

• “2.5.4 Relationship between access addresses and chip select signals (CS0–CS4) (This section is

added in part 2.)

The other description is the same as that of the 7733 Group. Therefore, refer to part 1:

• “2.5 Processor modes” (page 2–24 in part 1)

2.5 Processor modes

Fig. 2.5.1 Memory map in each processor mode (M37735MHBXXXFP)

Notes 1:

represents external area.

By accessing this area, an external device connected to the M37735MHBXXXFP

can be accessed.

address 6316) = “0002.”

For the other microcomputers of the 7735 Group, refer to section

Memory allocation of 7735 Group.”

Banks 1016 to FF16 cannot be accessed.

00000016

01FFFF16

00008016

02000016

FFFFFF16

000FFF16

00100016

0FFFFF16

10000016

SFR area

Internal

ROM area

Single-chip mode

Internal

RAM area

SFR area

Memory expansion mode

SFR area

Microprocessor mode

Internal

RAM area

Internal

RAM area

Internal

ROM area

(Note 4)

7733 bảng dữ liệu(PDF) 646 Page - Renesas Technology Corp

7733 bảng dữ liệu(HTML) 646 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL