7733 datasheet(645/940 Pages) RENESAS

645 / 940 page

CENTRAL PROCESSING UNIT (CPU)

7735 Group User’s Manual

2–5

2.3 Accessible area

Concerning section “2.3 Accessible area,” the 7735 Group differs from the 7733 Group in the following:

• Accessible area which is allocated to addresses 016 to 0FFFFF16 (Maximum of 1 Mbytes)

• Figure 2.3.1

The other description is the same as that of the 7733 Group. Therefore, refer to part 1:

• “2.3 Accessible area” (page 2–16 in part 1)

2.3 Accessible area

Fig. 2.3.1 M37735MHBXXXFP’s accessible area

00000016

00008016

00FFFF16

01000016

FE000016

FF000016

FFFFFF16

00100016

02000016

000FFF16

00007F16

01FFFF16

•SFR : Special Function Register

Notes 1: Banks 1016 to FF16 cannot be accessed.

2: Memory allocation of internal area in bank 016 depends on the microcomputer’s type and

settings of the memory allocation selection bits.

The above diagram shows the M37735MHBXXXFP’s accessible area immediately after reset.

For the other microcomputers of the 7735 Group, refer to “Appendix 1. Memory allocation of

7735 Group.” For settings of the memory allocation selection bits, refer to section “2.4 Memory

allocation.”

SFR area

Internal RAM area

Bank 016

Internal ROM area

Bank 116

Bank FF16

Bank FE16

represents the memory allocation of internal

areas.

indicates that nothing is allocated.

7733 bảng dữ liệu(PDF) 645 Page - Renesas Technology Corp