| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST20-GP1 bảng dữ liệu(PDF) 71 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST20-GP1 bảng dữ liệu(HTML) 71 Page - STMicroelectronics |
|
71 / 116 page ![]() ST20-GP1 71/116 ® 12.3 OS-Link connections Links are TTL compatible and intended to be used in electrically quiet environments, between devices on a single printed circuit board or between two boards via a backplane. Direct connection may be made between devices separated by a distance of less than 300 mm. For longer distances a matched 100 ohm transmission line should be used with series matching resistors (RM), see Figure 12.3. When this is done the line delay should be less than 0.4 bit time to ensure that the reflection returns before the next data bit is sent. Buffers may be used for very long transmissions, see Figure 12.4. If so, their overall propagation delay should be stable within the skew tolerance of the link, although the absolute value of the delay is immaterial. Figure 12.2 OS-Links directly connected Figure 12.3 OS-Links connected by transmission line Figure 12.4 OS-Links connected by buffers OSLinkOut OSLinkIn OSLinkIn OSLinkOut OSLinkOut OSLinkIn OSLinkIn OSLinkOut RM RM Zo=100 ohms Zo=100 ohms OSLinkOut OSLinkIn OSLinkIn OSLinkOut buffers |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |