S2-LPS datasheet(20/73 Pages) STMICROELECTRONICS

tên linh kiện	S2-LPS

Giải thích chi tiết về linh kiện	Ultra-low power, high performance, sub-1 GHz transceiver

PDF	73 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

20 / 73 page

Parameter

Comment

Min.

Typ.

Max.

Unit

Reset pulse width (Treset, figure below)

0.7

Power-on VDD slope

2.0

V/ms

The following picture shows how the S2-LPS must be controlled, i.e. the SDN signal must be tied to VBAT pin in

order to avoid two potential issues during the start-up phase:

A cross conduction can appear on the GPIO until an available command is present on it.

The ESD protection diode from the SDN pad can sink current from the external driver connected to the SDN.

Also the SDN signal generates an internal signal (POC), which disables the digital I/Os when set to 1.

Figure 7. Start-up phase

Examples of possible connections

Figure 8. Examples of possible connections for SDN pin

4.3

RF synthesizer

A crystal connected to XIN and XOUT provides a clock signal to the frequency synthesizer. The allowed clock

signal frequency is 26 MHz.

As an alternative, an external clock signal feeds XIN for proper operation. In this option, XOUT can be left either

floating or tied to ground.

S2-LPS

RF synthesizer

DS13831 - Rev 1

page 20/73

S2-LPS bảng dữ liệu(PDF) 20 Page - STMicroelectronics