| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TAS5504 bảng dữ liệu(PDF) 36 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TAS5504 bảng dữ liệu(HTML) 36 Page - Texas Instruments |
|
36 / 96 page ![]() Introduction 28 SLES123 − October 2004 TAS5504 Output Gain Coefficient 28 48 Select Output N Gain Coefficient 28 48 48 48 Output Gain Coefficient 28 48 Gain Coefficient 28 48 48 48 Gain Coefficient 28 48 48 1 or 2 Select Output N Select Output N Select Output N Select Output N 3 or 4 Figure 1−20. Output Mixers 1.12 PWM The TAS5504 has four channels of high performance digital PWM modulators that are designed to drive switching output stages (backends) in both single-ended (SE) and H-bridge (bridge tied load) configuration. The TAS5504 device uses noise-shaping and sophisticated error correction algorithms to achieve high power efficiency and high-performance digital audio reproduction. The TAS5504 uses an AD1 PWM modulation combined with a 5th order noise shaper to provide a 102-dB SNR from 20 to 20 kHz. The PWM section accepts 32-bit PCM data from the DAP and outputs four PWM audio output channels. The TAS5504 PWM section output supports both single-ended and bridge-tied loads. The PWM section provides a headphone PWM output to drive an external differential amplifier like the TPA112. The headphone circuit uses the PWM modulator for channels 1 and 2. The headphone will not operate while the backend drive channels are operating. The headphone will be enabled via a headphone select terminal or I2C command. The PWM section has individual channel dc blocking filters that can be enabled and disabled. The filter cutoff frequency is less than 1 Hz. The PWM section has individual channel de-emphasis filters for 32, 44.1, and 48 kHz that can be enabled and disabled. The PWM section also contains the power supply volume control (PSVC) PWM. The interpolator, noise shaper, and PWM sections provide a PWM output with the following features: • Up to 8x over sampling. − 8x at FS = 44.1 kHz, 48 kHz, 32 kHz, 38 kHz − 4x at FS = 88.2 kHz, 96 kHz − 2x at FS = 176.4 kHz, 192 kHz • 5th order noise shaping • 102-dB dynamic range 0 – 20 kHz (TAS5504 + TAS5111 system measured at speaker terminals) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |