F39-TGR-CVL-B-2-R datasheet(43/98 Pages) OMRON

tên linh kiện	F39-TGR-CVL-B-2-R

Giải thích chi tiết về linh kiện	Safety Light Curtain Type 4

PDF	98 Pages

Scroll/Zoom	100%

nhà sản xuất	OMRON [Omron Electronics LLC]

Trang chủ	http://www.omron.com/index3.html

Logo

43 / 98 page

SECTION 9

Safe Mounting Distances

!WARNING Never install an MS4800 system without

regard to the safety distance. If the MS4800

system is mounted too close to the point of

operation hazard, the machine may not stop in

time to prevent an operator injury.

An MS4800 system must be mounted far enough from the machine danger

zone so the machine will stop before a hand or other body part reaches the

hazardous area. This distance is called the safety distance. It is a calculated

number based on a formula.

The safety distance "S" is the minimum safe distance between the safety light

curtain and the point of operation (pinch point).

Calculation of the safety distance "S" is based on the European standard

EN999 and applies to safety light curtains that are used in industrial environ-

ments.

9-1

Safety distance for safeguarding danger points

!WARNING Additional countermeasures may be necessary to prevent access to the dan-

gerous area from above, below, the sides or the rear of the machine.

Additional countermeasures

Direction of

approach

F39-TGR-CVL-B-2-R bảng dữ liệu(PDF) 43 Page - Omron Electronics LLC