F39-TGR-CVL-B-2-R datasheet(57/98 Pages) OMRON

57 / 98 page

SECTION 12

Muting

!WARNING The muting and override functions disable the safety functions of the device.

You must ensure safety using other method when these functions are operat-

ing.

!WARNING Install muting sensors so that they can distinguish between the object that is

being allowed to pass through the detection zone and a person. If the muting

function is activated by the detection of a person, it may result in serious

injury.

!WARNING Muting lamps (external indicators) that indicate the state of the muting and

override functions must be installed where they are clearly visible to workers

from all the operating positions.

!WARNING Muting related time must be properly configured for its application by a suffi-

ciently trained and qualified person, and the person must have responsibility

for settings, especially when setting the muting time limit to infinite.

!WARNING Use independent 2 input devices for muting inputs.

!WARNING You must install MS4800 system muting sensor, and physical barrier, and con-

figure time settings for muting so that an operator should not enter hazardous

zone.

!WARNING Install the switch that activates the override in a location that provides a clear

view of the entire hazardous area and where it cannot be activated from within

the hazardous area. Make sure that nobody is in the hazardous area before

activating the override function.

12-1 Muting Controller RM-6

Muting with the MS4800 system is available together with the Muting Control-

ler RM-6.

The MS4800 and an RM-6 offer a limited set of muting functions. The follow-

ing list describes the muting functions that can be achieved with the MS4800:

• 2 Sensor muting

• 50 ms sensor input filtering

• Mute Bypass configurable: Enable/Disable

• Mute timeout configurable: 2 minutes/No timeout

F39-TGR-CVL-B-2-R bảng dữ liệu(PDF) 57 Page - Omron Electronics LLC