| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UPD17P136ACT bảng dữ liệu(PDF) 91 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD17P136ACT bảng dữ liệu(HTML) 91 Page - NEC |
|
91 / 292 page ![]() CHAPTER 9 REGISTER FILE (RF) 72 Figure 9-3. Accessing the Register File Using the PEEK and POKE Instructions 9.3 CONTROL REGISTER Figure 9-4 shows the configuration of the control register. As shown in Figure 9-4, the control register consists of 64 nibbles (64 ! 4 bits) allocated in register file addresses 00H to 3FH. However, only 26 nibbles are actually used. The remaining 38 nibbles are allocated for registers which have not yet been implemented. Data should not be read from or written to this area. There are two types of registers, both of which occupy one nibble of memory. One type is read/write (R/W), and the other is read-only (R). Note that within the read/write (R/W) flags, there exists a flag that will always be read as 0. The following read/write (R/W) flags are those flags which will always be read as 0: WR 0123456789 A B C D E F 0 1 2 3 4 5 6 7 0 3 1 2 3 4 5 6 7 BANK0 3 PEEK WR, RF53 8 POKE RF72, WR 7 PEEK WR, RF70 4 POKE RF6D, WR BANK1 Unmounted System register 1 POKE RF1F, WR Control register Register file for BANK0 Register file for BANK1 Column address Data memory 5 2 6 PEEK WR, RF02 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |