| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UPD17P136ACT bảng dữ liệu(PDF) 36 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD17P136ACT bảng dữ liệu(HTML) 36 Page - NEC |
|
36 / 292 page ![]() CHAPTER 3 PROGRAM COUNTER (PC) The program counter is used to specify an address in program memory. 3.1 PROGRAM COUNTER CONFIGURATION Figure 3-1 shows the configuration of the program counter. The program counters of the µPD17134A and µPD17135A are 10-bit binary counters. The program counters of the µPD17136A, µPD17137A, µPD17P136A, and µPD17P137A are 11-bit binary counters. This program counter is incremented whenever an instruction is executed. Figure 3-1. Program Counter Remark The shaded part is effective only in the case of µPD17136A/17137A/17P136A/17P137A. 3.2 PROGRAM COUNTER OPERATION Normally, the program counter is automatically incremented each time a command is executed. The memory address at which the next instruction to be executed is stored is assigned to the program counter under the following conditions: At reset; when a branch, subroutine call, return, or table reference instruction is executed; or when an interrupt is received. 3.2.1 to 3.2.7 explain program counter operation during execution of each instruction. PC PC9 PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0 MSB LSB PC10 17 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |