STM32F446MC datasheet(14/201 Pages) STMICROELECTRONICS

tên linh kiện	STM32F446MC

Giải thích chi tiết về linh kiện	8- to 14-bit parallel camera interface up to 54 Mbytes

PDF	201 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

14 / 201 page

Description

STM32F446xC/E

14/201

DocID027107 Rev 5

2.1

Compatibility with STM32F4 family

The STM32F446xC/xV is software and feature compatible with the STM32F4 family.

The STM32F446xC/xV can be used as drop-in replacement of the other STM32F4 products

but some slight changes have to be done on the PCB board.

Figure 1. Compatible board design for LQFP100 package

For the LQFP100 package, only FMC Bank1 or Bank2 are available. Bank1 can only support a multiplexed NOR/PSRAM memory using the

NE1 Chip Select. Bank2 can only support a 16- or 8-bit NAND Flash memory using the NCE2 Chip Select. The interrupt line cannot be used

since Port G is not available in this package.

The SPI1, SPI2 and SPI3 interfaces give the flexibility to work in an exclusive way in either the SPI mode or the I2S audio mode.

For the LQFP64 package, the Quad SPI is available with limited features.

VDD/VDDA minimum value of 1.7 V is obtained when the device operates in reduced temperature range, and with the use of an external

power supply supervisor (refer to Section 3.16.2: Internal reset OFF).

STM32F446MC bảng dữ liệu(PDF) 14 Page - STMicroelectronics