STM32F446MC datasheet(74/201 Pages) STMICROELECTRONICS

74 / 201 page

Electrical characteristics

STM32F446xC/E

74/201

DocID027107 Rev 5

6.1.7

Current consumption measurement

Figure 19. Current consumption measurement scheme

6.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 13: Voltage characteristics,

Table 14: Current characteristics, and Table 15: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Table 13. Voltage characteristics

Symbol

Ratings

Min

Max

Unit

VDD–VSS

External main supply voltage (including VDDA, VDD,

VDDUSB and VBAT)(1)

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

–0.3

4.0

VIN

Input voltage on FT & FTf pins(2)

2. VIN maximum value must always be respected. Refer to Table 14 for the values of the maximum allowed

injected current.

VSS–0.3 VDD+4.0

Input voltage on TTa pins

VSS–0.3

4.0

Input voltage on any other pin

VSS–0.3

4.0

Input voltage on BOOT0 pin

VSS

9.0

ΔVDDx|

Variations between different VDD power pins

|VSSX −VSS|

Variations between all the different ground pins

VESD(HBM)

Electrostatic discharge voltage (human body model)

see Section 6.3.15:

Absolute maximum

ratings (electrical

sensitivity)

STM32F446MC bảng dữ liệu(PDF) 74 Page - STMicroelectronics

STM32F446MC bảng dữ liệu(HTML) 74 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL