| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MEC1322 bảng dữ liệu(PDF) 218 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MEC1322 bảng dữ liệu(HTML) 218 Page - Microchip Technology |
|
218 / 456 page ![]() MEC1322 DS00001719D-page 218 2014 - 2015 Microchip Technology Inc. 16.0 WATCHDOG TIMER (WDT) 16.1 Introduction The function of the Watchdog Timer is to provide a mechanism to detect if the internal embedded controller has failed. When enabled, the Watchdog Timer (WDT) circuit will generate a WDT Event if the user program fails to reload the WDT within a specified length of time known as the WDT Interval. 16.2 References No references have been cited for this chapter. 16.3 Terminology There is no terminology defined for this chapter. 16.4 Interface This block is designed to be accessed internally via a registered host interface or externally via the signal interface. 16.5 Host Interface The registers defined for the Watchdog Timer (WDT) are accessible by the embedded controller as indicated in Section 16.8, "EC-Only Registers". All registers accesses are synchronized to the host clock and complete immediately. Regis- ter reads/writes are not delayed by the 32KHz_Clk. FIGURE 16-1: I/O DIAGRAM OF BLOCK Watchdog Timer (WDT) Clock Inputs WDT Event Resets Host Interface |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |