RM0312 datasheet(20/275 Pages) STMICROELECTRONICS

20 / 275 page

Central processing unit (CPU)

RM0312

20/275

DocID022352 Rev 3

Figure 2. Stacking order

Condition code register (CC)

The condition code register is an 8-bit register which indicates the result of the instruction

just executed as well as the state of the processor. The 6th bit (MSB) of this register is

reserved. These bits can be individually tested by a program and specified action taken as a

result of their state. The following paragraphs describe each bit:

•

V: Overflow

When set, V indicates that an overflow occurred during the last signed arithmetic operation,

on the MSB result bit. See the INC, INCW, DEC, DECW, NEG, NEGW, ADD, ADDW, ADC,

SUB, SUBW, SBC, CP, and CPW instructions.

•

I1: Interrupt mask level 1

The I1 flag works in conjunction with the I0 flag to define the current interruptability level as

shown in Table 2. These flags can be set and cleared by software through the RIM, SIM,

HALT, WFI, IRET, TRAP, and POP instructions and are automatically set by hardware when

entering an interrupt service routine.

JUMP TO INTERRUPT ROUTINE GIVEN BY THE INTERRUPT VECTOR

INTERRUPT GENERATION (execute pipeline)

PCE

PCL

STACK

(PUSH)

UNSTACK

PCH

JUMP TO THE ADDRESS GIVEN BY PROGRAM COUNTER (Reload Pipeline)

IRET INSTRUCTION

(POP)

9 CPU CYCLES

POP PCL

POP PCH

POP PCE

POP Y

POP X

POP A

POP CC

PUSH PCL

PUSH PCH

PUSH PCE

PUSH Y

PUSH X

PUSH A

PUSH CC

Complete instruction in execute stage (1-6 cycles latency)

RM0312 bảng dữ liệu(PDF) 20 Page - STMicroelectronics

RM0312 bảng dữ liệu(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL