| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
RM0312 bảng dữ liệu(PDF) 146 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0312 bảng dữ liệu(HTML) 146 Page - STMicroelectronics |
|
146 / 275 page ![]() 16-bit general purpose timer (TIM2/TIM3) RM0312 146/275 DocID022352 Rev 3 17.7.3 Slave mode control register (TIMx_SMCR) Address offset: 0x02 Reset value: 0x00 7 654 3210 MSM TS[2:0] Reserved SMS[2:0] rw rw rw Bit 7 MSM: Master/slave mode 0: No action 1: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between timers (through TRGO). Bits 6:4 TS[2:0]: Trigger selection This bit-field selects the trigger input to be used to synchronize the counter. 000: Internal trigger ITR0 connected to TIM4 TRGO 001: Reserved 010: Internal trigger ITR2 connected to TIM3 TRGO 011: Internal trigger ITR3 connected to TIM2 TRGO 100: TI1 Edge Detector (TI1F_ED) 101: Filtered Timer Input 1 (TI1FP1) 110: Filtered Timer Input 2 (TI2FP2) 111: External Trigger input (ETRF) Note: These bits must be changed only when they are not used (e.g. when SMS=000) to avoid wrong edge detections at the transition. Bit 3 Reserved Bits 2:0 SMS[2:0]: Clock/trigger/slave mode selection When external signals are selected, the active edge of the trigger signal (TRGI) is linked to the polarity selected on the external input (see Input Control register and Control register description). 000: Clock/trigger controler disabled - if CEN = ‘1’ then the prescaler is clocked directly by the internal clock. 001: Reserved 010: Reserved 011: Reserved 100: Trigger reset mode - Rising edge of the selected trigger signal (TRGI) reinitializes the counter and generates an update of the registers. 101: Gated Mode - The counter clock is enabled when the trigger signal (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled. 110: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled. 111: External clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |