| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN4043 bảng dữ liệu(PDF) 41 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4043 bảng dữ liệu(HTML) 41 Page - STMicroelectronics |
|
41 / 60 page ![]() AN4043 Package Doc ID 022726 Rev 2 41/60 Positive DC-link Pin: P ● This is a DC-link positive power supply pin of the inverter and it is internally connected to the collectors of the high-side IGBTs ● To suppress the surge voltage caused by the DC-link wiring or PCB pattern inductance, connect a smoothing filter capacitor close to the P pin. Generally a 0.1 or 0.22 µF high frequency, high voltage non-inductive capacitor is recommended. Negative DC-link Pins: NU, NV, NW ● These are the DC-link negative power supply pins (power ground) of the inverter ● These pins are connected to the low-side IGBT emitters of each phase ● The power ground of the application should be separated from the logic ground of the system and they should be reconnected at one specific point (star connection). Inverter power output Pins: U, V, W ● Inverter output pins for connecting to the inverter load (e.g. motor). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |