A3P030 datasheet(12/220 Pages) MICROSEMI

12 / 220 page

ProASIC3 Device Family Overview

1-6

Revision 13

The inputs of the six CCC blocks are accessible from the FPGA core or from one of several inputs

located near the CCC that have dedicated connections to the CCC block.

The CCC block has these key features:

•

Wide input frequency range (fIN_CCC) = 1.5 MHz to 350 MHz

•

Output frequency range (fOUT_CCC) = 0.75 MHz to 350 MHz

•

Clock delay adjustment via programmable and fixed delays from –7.56 ns to +11.12 ns

•

2 programmable delay types for clock skew minimization

•

Clock frequency synthesis (for PLL only)

Additional CCC specifications:

•

Internal phase shift = 0°, 90°, 180°, and 270°. Output phase shift depends on the output divider

configuration (for PLL only).

•

Output duty cycle = 50% ± 1.5% or better (for PLL only)

•

Low output jitter: worst case < 2.5% × clock period peak-to-peak period jitter when single global

network used (for PLL only)

•

Maximum acquisition time = 300 µs (for PLL only)

•

Low power consumption of 5 mW

•

Exceptional tolerance to input period jitter— allowable input jitter is up to 1.5 ns (for PLL only)

•

Four precise phases; maximum misalignment between adjacent phases of 40 ps × (350 MHz /

fOUT_CCC) (for PLL only)

Global Clocking

ProASIC3 devices have extensive support for multiple clocking domains. In addition to the CCC and PLL

support described above, there is a comprehensive global clock distribution network.

Each VersaTile input and output port has access to nine VersaNets: six chip (main) and three quadrant

global networks. The VersaNets can be driven by the CCC or directly accessed from the core via

multiplexers (MUXes). The VersaNets can be used to distribute low-skew clock signals or for rapid

distribution of high fanout nets.

A3P030 bảng dữ liệu(PDF) 12 Page - Microsemi Corporation