VMV3 datasheet(42/212 Pages) MICROSEMI

42 / 212 page

Military ProASIC3/EL DC and Switching Characteristics

2-28

Revision 3

1.2 V Core Operating Voltage

Table 2-30 • Summary of I/O Timing Characteristics—Software Default Settings

–1 Speed Grade, Military-Case Conditions: TJ = 125°C, Worst Case VCC = 1.14 V, Worst Case

VCCI

Applicable to Pro I/Os for A3PE600L and A3PE3000L Only

Standard

3.3 V LVTTL /

3.3 V LVCMOS

12 mA

12 mA High 5

– 0.68 2.09 0.05 1.49 2.03 0.44 2.12 1.56 2.76 3.06 3.99 3.43

3.3 V LVCMOS

Wide Range3

100 µA

12 mA High 5

– 0.68 3.01 0.04 1.86 2.69 0.44 3.01 2.22 4.03 4.42 4.89 4.09

2.5 V LVCMOS

12 mA

12 mA High 5

– 0.68 2.12 0.04 1.73 2.17 0.44 2.15 1.74 2.84 2.95 4.03 3.62

1.8 V LVCMOS

12 mA

12 mA High 5

– 0.68 2.36 0.05 1.70 2.40 0.44 2.40 1.94 3.16 3.58 4.27 3.81

1.5 V LVCMOS

12 mA

12 mA High 5

– 0.68 2.71 0.04 1.86 2.61 0.44 2.76 2.24 3.34 3.69 4.63 4.12

1.2 V LVCMOS

2 mA

2 mA High 5

– 0.68 4.39 0.04 2.25 3.19 0.44 4.24 3.74 4.34 4.09 6.11 5.61

1.2 V LVCOMS

Wide Range4

100 µA

2 mA High 5

– 0.68 4.39 0.04 2.25 3.19 0.44 4.24 3.74 4.34 4.09 6.11 5.61

3.3 V PCI

Per PCI

spec

–

High 10 255 0.68 2.37 0.04 2.31 3.13 0.44 2.40 1.68 2.77 3.06 4.28 3.56

3.3 V PCI-X

Per PCI-X

spec

–

High 10 255 0.68 2.37 0.04 2.31 3.13 0.44 2.40 1.68 2.77 3.06 4.28 3.56

3.3 V GTL

20 mA6 20 mA6 High 10 25 0.68 1.75 0.05 1.99 –

0.44 1.71 1.75

–

3.59 3.62

2.5 V GTL

20 mA6 20 mA6 High 10 25 0.68 1.79 0.05 1.93 –

0.44 1.82 1.79

–

3.70 3.67

3.3 V GTL+

35 mA

35 mA High 10 25 0.68 1.74 0.05 1.99 –

0.44 1.76 1.73

–

3.64 3.61

2.5 V GTL+

33 mA

33 mA High 10 25 0.68 1.86 0.05 1.93 –

0.44 1.89 1.77

–

3.77 3.64

HSTL (I)

8 mA

8 mA High 20 25 0.68 2.68 0.05 2.34 –

0.44 2.73 2.65

–

4.60 4.52

HSTL (II)

15 mA6 15 mA6 High 20 50 0.68 2.55 0.05 2.34 –

0.44 2.59 2.28

–

4.47 4.16

SSTL2 (I)

15 mA

15 mA High 30 25 0.68 1.80 0.05 1.78 –

0.44 1.82 1.55

–

1.82 1.55

SSTL2 (II)

15 mA

15 mA High 30 50 0.68 1.83 0.05 1.78 –

0.44 1.86 1.49

–

1.86 1.49

SSTL3 (I)

14 mA

14 mA High 30 25 0.68 1.95 0.05 1.71 –

0.44 1.98 1.55

–

1.98 1.55

SSTL3 (II)

21 mA

21 mA High 30 50 0.68 1.75 0.05 1.71 –

0.44 1.77 1.41

–

1.77 1.41

LVDS

24 mA

–

High –

– 0.68 1.59 0.05 2.11

–

LVPECL

24 mA

–

High –

– 0.68 1.51 0.05 1.84 –

–

Notes:

1. Note that 1.2 V LVCMOS and 3.3 V LVCMOS wide range are applicable to 100 µA drive strength only. The configuration

will not operate at the equivalent software default drive strength. These values are for normal ranges only.

2. Output delays provided in this table were extracted with an output load indicated in the Capacitive Load column. For a

specific output load, refer to Designer software.

3. All LVCMOS 3.3 V software macros support LVCMOS 3.3 V wide range as specified in the JESD8-B specification.

4. All LVCMOS 1.2 V software macros support LVCMOS 1.2 V wide range as specified in the JESD8-12 specification.

5. Resistance is used to measure I/O propagation delays as defined in PCI specifications. See Figure 2-15 on page 2-73 for

connectivity. This resistor is not required during normal operation.

6. Output drive strength is below JEDEC specification.

7. For specific junction temperature and voltage supply levels, refer to Table 2-5 on page 2-8 for derating values.

VMV3 bảng dữ liệu(PDF) 42 Page - Microsemi Corporation

VMV3 bảng dữ liệu(HTML) 42 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL