DM330023-2 datasheet(30/64 Pages) MICROCHIP

30 / 64 page

dsPICDEM™ MCHV Development System User’s Guide

DS70605A-page 24

 2009 Microchip Technology Inc.

Once code is halted, hovering over a variables opens a tool tip window that contains

the current value of the variable.

2.4.4.2.3

Using Watch Windows

To use a Watch window:

1. The Watch window is made visible on the desktop by selecting View>Watch. It

contains four selectable Watch views (via tabs) in which to view variables (SFRs,

symbols and absolute addresses).

2. Select an SFR or Symbol from the list and click the related Add button to add it

to the Watch window. Or click in the “Address” column and enter an absolute

address.

A Watch window populated with an SFRs and Symbols will look like Figure 2-9. For

more on using Watch windows, see MPLAB IDE Help.

FIGURE 2-9:

WATCH WINDOW EXAMPLE

2.4.5

Programming an Application

When the program is successfully debugged and running, the next step is to program

the device for stand-alone operation in the finished design. When doing this, the

resources reserved for debug are released for use by the application. To program the

application, use the following steps:

1. Disable Starter Kits as a debug tool by selecting Debugger>Select Tool>None.

2. Select Starter Kits as the programmer in the Programmer>Select Programmer

menu.

3. Select Programmer>Program.

At this point, the application code will run independently.

Note: This feature must be configured. Select Edit>Properties and click the

Tooltips tab, and select the “Enable Variable Mouseover Values” check

box.

DM330023-2 bảng dữ liệu(PDF) 30 Page - Microchip Technology