DM330023-2 datasheet(27/64 Pages) MICROCHIP

27 / 64 page

Getting Started

 2009 Microchip Technology Inc.

DS70605A-page 21

4. Select Debugger>Program to program the application code into the dsPIC33F

DCS device on the Starter Kit. The debug programming progress will be visible

in the Starter Kit tab of the Output window.

2.4.4.1

RUNNING THE APPLICATION

The Starter Kit executes in either real-time (Run) or steps (Step Into, Step Over, and

Animate) real-time execution occurs when you select Run in MPLAB IDE. Once the

device code is halted, either by Halt or a breakpoint, you can step.

Toolbar buttons can be used for quick access to commonly used debug operations.

Refer to Section 3.3 “Running the Example Application” in the “MPLAB Starter Kit

for dsPIC® Digital Signal Controllers User’s Guide” (DS51700).

To see how these options function, do the following:

1. Select Debugger>Reset>Processor Reset or click the Reset button to reset the

program.

2. Select Debugger>Run or click the Run button. Observe how the application

operates.

3. Select Debugger>Halt or click the Halt button to stop the program execution. A

green solid arrow will mark the line of code in the File window where the program

halted.

4. Select Debugger>Step Into or click the Step Into button to step the program exe-

cution once. The green solid arrow will move down one line of code in the File

window. Repeatedly click the button to step through the code.

5. Select Debugger>Reset>Processor Reset click the Reset button to reset the

program again. The arrow will disappear, meaning the device is reset.

Note: Debug executive code is automatically programmed in the upper program

memory of the Starter Kit device when the Starter Kit is selected as a

debugger. Debug code must be programmed into the target device to use

the in-circuit debugging capabilities of the Starter Kit.

Note: All the peripherals are frozen when the “Halt” button is pressed to stop the

program execution.

DM330023-2 bảng dữ liệu(PDF) 27 Page - Microchip Technology