705-5100-F21 datasheet(21/52 Pages) MAGNETROL

21 / 52 page

ALARM_SUM: This parameter summarized the status of

up to 16 block alarms.

4.2

Physical Block

The Physical Block contains data specific to the Enhanced

Model 705 PA transmitter, along with some

information about the firmware.

NOTE: The Physical Block has no control function.

MODE_BLK: Actual mode must be in AUTO in order for

the AI Function blocks in the transmitter to operate.

NOTE: A Physical Block in “out of service” will stop all function block

execution in the transmitter.

SOFTWARE_REVISION: Revision number of the

software of the field device.

HARDWARE_REVISION: Revision number of the

hardware of the field device.

DEVICE_MAN_ID: Identification code of the

manufacturer of the field device.

DEVICE_ID: Manufacturer specific identification of the

device.

DEVICE_SER_NUM: Serial number of the device.

DIAGNOSIS: Detailed information about the device,

bitwise coded.

DIAGNOSIS_EXTENSION: Additional detailed

information about the device.

DIAGNOSIS_MASK: Definition of supported

DIAGNOSIS information-bits.

0 = not supported

1 = supported

DIAGNOSIS_MASK_EXTENSION: Definition of sup-

ported DIAGNOSIS_EXTENSION information-bits.

0 = not supported

1 = supported

DEVICE CERTIFICATION: Pertinent certifications of

the device.

57-645 Eclipse Guided Wave Radar Transmitter - PROFIBUS PA™

705-5100-F21 bảng dữ liệu(PDF) 21 Page - Magnetrol International, Inc.