| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMP320LC2401AVFS bảng dữ liệu(PDF) 57 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TMP320LC2401AVFS bảng dữ liệu(HTML) 57 Page - Texas Instruments |
|
57 / 88 page ![]() TMS320LF2401A, TMS320LC2401A DSP CONTROLLERS SPRS161K − MARCH 2001 − REVISED JULY 2007 57 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 LF2401A AND LC2401A ELECTRICAL SPECIFICATIONS DATA This document contains information on products in more than one phase of development. The electrical specifications for the TMS320LF2401A device are Production Data (PD) and those for the TMS320LC2401A device are Product Preview (PP). These electrical specifications are subject to change. absolute maximum ratings over operating temperature range (unless otherwise noted)† Supply voltage range, VDD, VDDO, and VCCA (see Note 1) − 0.3 V to 4.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCCP range (LF2401A) − 0.3 V to 5.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input voltage range, VIN − 0.3 V to 4.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output voltage range, VO − 0.3 V to 4.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input clamp current, IIK (VIN < 0 or VIN > VCC) ± 20 mA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output clamp current, IOK (VO < 0 or VO > VCC) ± 20 mA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating ambient temperature ranges, TA: A version‡ − 40 °C to 85°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S version‡ −40 °C to 125°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage temperature range, Tstg − 65 °C to 150°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † Clamp current stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. ‡ Long-term high-temperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall device life. For additional information, see IC Package Thermal Metrics Application Report (literature number SPRA953) and Reliability Data for TMS320LF24x and TMS320F281x Devices Application Report (literature number SPRA963). NOTE 1: All voltage values are with respect to VSS. recommended operating conditions§ MIN NOM MAX UNIT VDD/VDDO Supply voltage VDDO = VDD ± 0.3 V 3 3.3 3.6 V VSS Supply ground 0 0 0 V VCCA¶ ADC supply voltage 3 3.3 3.6 V VCCP Flash programming supply voltage (LF2401A)# 4.75 5 5.25 V fCLKOUT Device clock frequency (system clock) 2 40 MHz VIH High-level input voltage All inputs 2 V VIH High-level input voltage All inputs 2 V VIL Low-level input voltage All inputs 0.8 V VIL Low-level input voltage All inputs 0.8 V Output pins Group 1|| − 2 mA IOH High-level output source current, VOH = 2.4 V Output pins Group 2|| − 4 mA IOH High-level output source current, VOH = 2.4 V Output pins Group 3|| − 8 mA Output pins Group 1|| 2 mA IOL Low-level output sink current, VOL = VOL MAX Output pins Group 2|| 4 mA IOL Low-level output sink current, VOL = VOL MAX Output pins Group 3|| 8 mA TA Ambient temperature A version − 40 85 °C TA Ambient temperature S version − 40 125 °C Nf Flash endurance for the array (Write/erase cycles) − 40 °C to 85°C 10K cycles § See the mechanical data package page for thermal resistance values, ΘJA (junction-to-ambient) and ΘJC (junction-to-case). ¶ VCCA should not exceed VDD by 0.3 V. # For applications that involve millions of power cycles, it is recommended that VCCP be powered after VDD. || Primary signals and their groupings: Group 1: PDPINTA/IOPA0, T2PWM, PWM1−PWM6 (IOPA1−IOPA6), IOPB0, IOPB1, OPB5, TMS/XF, RS, TCK, TDI Group 2: SCITXD/IOPB3, SCIRXD/IOPB4, TDO/IOPB2 Group 3: CAP1, IOPA7, CLKOUT |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |