| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MAC7200 bảng dữ liệu(PDF) 269 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MAC7200 bảng dữ liệu(HTML) 269 Page - Freescale Semiconductor, Inc |
|
269 / 976 page ![]() IEEE 1149.1 State Machine and RD/WR Sequences MAC7200 Microcontroller Family Reference Manual, Rev. 2 Freescale Semiconductor 191 11.12.2 JTAG Sequence for Accessing Internal Nexus Registers 11.12.3 JTAG Sequence for Read Access of Memory-Mapped Resources 11.12.4 JTAG Sequence for Write Access of Memory-Mapped Resources Table 11-46. JTAG Sequence for Accessing Internal Nexus Registers Step # TMS Pin Description 11 IDLE → SELECT-DR_SCAN 2 0 SELECT-DR_SCAN → CAPTURE-DR (Nexus Command Register value loaded in shifter) 3 0 CAPTURE-DR → SHIFT-DR 4 0 (7) TCK clocks issued to shift in direction (rd/wr) bit and first 6 bits of Nexus reg. addr. 5 1 SHIFT-DR → EXIT1-DR (7th bit of Nexus reg. shifted in) 6 1 EXIT1-DR → UPDATE-DR (Nexus shifter is transferred to Nexus Command Register) 7 1 UPDATE-DR → SELECT-DR_SCAN 8 0 SELECT-DR_SCAN → CAPTURE-DR (Register value is transferred to Nexus shifter) 9 0 CAPTURE-DR → SHIFT-DR 10 0 (31) TCK clocks issued to transfer register value to TDO pin while shifting in TDI value 11 1 SHIFT-DR → EXIT1-DR (MSB of value is shifted in/out of shifter) 12 1 EXIT1-DR → UPDATE-DR (if access is write, shifter is transferred to register) 13 0 UPDATE-DR → RUN-TEST/IDLE (transfer complete, Nexus controller to Reg. Select state) Table 11-47. JTAG Sequence for Read Access of Memory-Mapped Resources Step # TCLK clocks Description 1 13 Nexus Command = write to Read/Write Access Address Register (RWA) 2 37 Write RWA (initialize starting read address, data input on TDI) 3 13 Nexus Command = write to Read/Write Control/Status Register (RWCS) 4 37 Write RWCS (initialize read access mode and CNT value, data input on TDI) 5 — Wait for falling edge of RDY pin 6 13 Nexus Command = read Read/Write Access Data Register (RWD) 7 37 Read RWD (data output on TDO) 8 — If CNT > 0, go back to Step #6 Table 11-48. JTAG Sequence for Write Access of Memory-Mapped Resources Step # TCLK clocks Description 1 13 Nexus Command = write to Read/Write Address Register (RWA) 2 37 Write RWA (initialize starting write address, data input on TDI) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |