IMX35 datasheet(55/148 Pages) FREESCALE

55 / 148 page

i.MX35 Applications Processors for Industrial and Consumer Products, Rev. 6

Freescale Semiconductor

NOTE

SDRAM CLK and DQS-related parameters are measured from the 50%

point—that is, “high” is defined as 50% of signal value and “low” is defined

as 50% of signal value.

The timing parameters are similar to the ones used in SDRAM data sheets.

Table 40 indicates SDRAM requirements. All output signals are driven by

the ESDCTL at the negative edge of SDCLK, and the parameters are

measured at maximum memory frequency.

Figure 36. Mobile DDR SDRAM DQ versus DQS and SDCLK Read Cycle Timing Diagram

NOTE

SDRAM CLK and DQS-related parameters are measured from the 50%

point—that is, “high” is defined as 50% of signal value, and “low” is

defined as 50% of signal value.

The timing parameters are similar to the ones used in SDRAM data sheets.

Table 41 indicates SDRAM requirements. All output signals are driven by

the ESDCTL at the negative edge of SDCLK, and the parameters are

measured at maximum memory frequency.

Table 41. Mobile DDR SDRAM Read Cycle Timing Parameters

Parameter

Symbol

Min. Max. Unit

SD21 DQS – DQ Skew (defines the Data valid window in read cycles related to DQS).

tDQSQ

—

0.85

SD22 DQS DQ HOLD time from DQS

tQH

2.3

—

SD23 DQS output access time from SDCLK posedge

tDQSCK

—

6.7

SDCLK

DQS (input)

DQ (input)

Data

SD23

SD21

SD22

IMX35 bảng dữ liệu(PDF) 55 Page - Freescale Semiconductor, Inc

IMX35 bảng dữ liệu(HTML) 55 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL