OMAP3530-HiRel datasheet(133/239 Pages) TI

133 / 239 page

OMAP3525-HiRel and OMAP3530-HiRel Applications Processors

www.ti.com

SPRS599 – JUNE 2009

–

G = 0.5 * ADVExtraDelay * GPMC_FCLK if ((ADVWrOffTime – ClkActivationTime) is a multiple of 3)

–

G = (1 + 0.5 * ADVExtraDelay) * GPMC_FCLK if ((ADVWrOffTime – ClkActivationTime – 1) is a multiple of 3)

–

G = (2 + 0.5 * ADVExtraDelay) * GPMC_FCLK if ((ADVWrOffTime – ClkActivationTime – 2) is a multiple of 3)

(8) For OE falling edge (OE activated) / IO DIR rising edge (Data Bus input direction):

–

Case GpmcFCLKDivider = 0:

–

H = 0.5 * OEExtraDelay * GPMC_FCLK

–

Case GpmcFCLKDivider = 1:

–

H = 0.5 * OEExtraDelay * GPMC_FCLK if (ClkActivationTime and OEOnTime are odd) or (ClkActivationTime and OEOnTime

are even)

–

H = (1 + 0.5 * OEExtraDelay) * GPMC_FCLK otherwise

–

Case GpmcFCLKDivider = 2:

–

H = 0.5 * OEExtraDelay * GPMC_FCLK if ((OEOnTime – ClkActivationTime) is a multiple of 3)

–

H = (1 + 0.5 * OEExtraDelay) * GPMC_FCLK if ((OEOnTime – ClkActivationTime – 1) is a multiple of 3)

–

H = (2 + 0.5 * OEExtraDelay) * GPMC_FCLK if ((OEOnTime – ClkActivationTime – 2) is a multiple of 3)

For OE rising edge (OE deactivated):

–

GpmcFCLKDivider = 0:

–

H = 0.5 * OEExtraDelay * GPMC_FCLK

–

Case GpmcFCLKDivider = 1:

–

H = 0.5 * OEExtraDelay * GPMC_FC if (ClkActivationTime and OEOffTime are odd) or (ClkActivationTime and OEOffTime are

even)

–

H = (1 + 0.5 * OEExtraDelay) * GPMC_FCLK otherwise

–

Case GpmcFCLKDivider = 2:

–

H = 0.5 * OEExtraDelay * GPMC_FCLK if ((OEOffTime – ClkActivationTime) is a multiple of 3)

–

H = (1 + 0.5 * OEExtraDelay) * GPMC_FCLK if ((OEOffTime – ClkActivationTime – 1) is a multiple of 3)

–

H = (2 + 0.5 * OEExtraDelay) * GPMC_FCLK if ((OEOffTime – ClkActivationTime – 2) is a multiple of 3)

(9) For WE falling edge (WE activated):

–

Case GpmcFCLKDivider = 0:

–

I = 0.5 * WEExtraDelay * GPMC_FCLK

–

Case GpmcFCLKDivider = 1:

–

I = 0.5 * WEExtraDelay * GPMC_FCLK if (ClkActivationTime and WEOnTime are odd) or (ClkActivationTime and WEOnTime

are even)

–

I = (1 + 0.5 * WEExtraDelay) * GPMC_FCLK otherwise

–

Case GpmcFCLKDivider = 2:

–

I = 0.5 * WEExtraDelay * GPMC_FCLK if ((WEOnTime – ClkActivationTime) is a multiple of 3)

–

I = (1 + 0.5 * WEExtraDelay) * GPMC_FCLK if ((WEOnTime – ClkActivationTime – 1) is a multiple of 3)

–

I = (2 + 0.5 * WEExtraDelay) * GPMC_FCLK if ((WEOnTime – ClkActivationTime – 2) is a multiple of 3)

For WE rising edge (WE deactivated):

–

Case GpmcFCLKDivider = 0:

–

I = 0.5 * WEExtraDelay * GPMC_FCLK

–

Case GpmcFCLKDivider = 1:

–

I = 0.5 * WEExtraDelay * GPMC_FCLK if (ClkActivationTime and WEOffTime are odd) or (ClkActivationTime and WEOffTime

are even)

–

I = (1 + 0.5 * WEExtraDelay) * GPMC_FCLK otherwise

–

Case GpmcFCLKDivider = 2:

–

I = 0.5 * WEExtraDelay * GPMC_FCLK if ((WEOffTime – ClkActivationTime) is a multiple of 3)

–

I = (1 + 0.5 * WEExtraDelay) * GPMC_FCLK if ((WEOffTime – ClkActivationTime – 1) is a multiple of 3)

–

I = (2 + 0.5 * WEExtraDelay) * GPMC_FCLK if ((WEOffTime – ClkActivationTime – 2) is a multiple of 3)

(10) J = GPMC_FCLK period

(11) In gpmc_ncsx, x is equal to 0, 1, 2, 3, 4, 5, 6, or 7. In gpmc_waitx, x is equal to 0, 1, 2, or 3.

(12) P = gpmc_clk period

(13) For read: K = (ADVRdOffTime – ADVOnTime) * (TimeParaGranularity + 1) * GPMC_FCLK

For write: K = (ADVWrOffTime – ADVOnTime) * (TimeParaGranularity + 1) * GPMC_FCLK

(14) GPMC_FCLK is General-Purpose Memory Controller internal functional clock.

(15) Related to the gpmc_clk output clock maximum and minimum frequencies programmable in the I/F module by setting the

GPMC_CONFIG1_CSx configuration register bit field GpmcFCLKDivider.

(16) The jitter probability density can be approximated by a Gaussian function.

(17) M = (RdCycleTime - AccessTime) * (TimeParaGranularity + 1) * GPMC_FCLK

Above M parameter expression is given as one example of GPMC programming. IO DIR signal will go from IN to OUT after both

RdCycleTime and BusTurnAround completion. Behavior of IO direction signal does depend on kind of successive Read/Write accesses

performed to Memory and multiplexed or non-multiplexed memory addressing scheme, bus keeping feature enabled or not. IO DIR

behavior is automatically handled by GPMC controller. For a full description of the gpmc_io_dir feature, see the OMAP35x Technical

Reference Manual (TRM) [literature number SPRUF98].

Submit Documentation Feedback

TIMING REQUIREMENTS AND SWITCHING CHARACTERISTICS

133

OMAP3530-HiRel bảng dữ liệu(PDF) 133 Page - Texas Instruments

OMAP3530-HiRel bảng dữ liệu(HTML) 133 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL