ML5800

DS5800-F-04

FINAL DATASHEET

JULY 2006

25

WARRANTY

Micro Linear makes no representations or warranties with respect to the accuracy, utility, or completeness of the

contents of this publication and reserves the right to make changes to specifications and product descriptions at any

time without notice. No license, express or implied, by estoppel or otherwise, to any patents or other intellectual

property rights is granted by this document. The circuits contained in this document are offered as possible applications

only. Particular uses or applications may invalidate some of the specifications and/or product descriptions contained

herein. The customer is urged to perform its own engineering review before deciding on a particular application. Micro

Linear assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of

Micro Linear products including liability or warranties relating to merchantability, fitness for a particular purpose, or

infringement of any intellectual property right. Micro Linear products are not designed for use in medical, life saving, or

life sustaining applications.

If this document is “Advance”, its contents describe a Micro Linear product that is currently under development. All

detailed specifications including pinouts and electrical specifications may be changed without notice. If this document is

“Preliminary”, its contents are based on early silicon measurements. Typical data is representative of the product but is

subject to change without notice. Pinout and mechanical dimensions are final. Preliminary documents supersede all

Advance documents and all previous Preliminary versions. If this document is “Final”, its contents are based on a

characterized product, and it is believed to be accurate at the time of publication. Final Data Sheets supersede all

previously published versions.

© 2006 Micro Linear Corporation. All rights reserved. All other trademarks are the property of their respective owners.

Products described herein may be covered by one or more of the following U.S. patents: 4,897,611; 4,964,026;

5,027,116; 5,281,862; 5,283,483; 5,418,502; 5,508,570; 5,510,727; 5,523,940; 5,546,017; 5,559,470; 5,565,761;

5,592,128; 5,594,376; 5,652,479; 5,661,427; 5,663,874; 5,672,959; 5,689,167; 5,714,897; 5,717,798; 5,742,151;

5,747,977; 5,754,012; 5,757,174; 5,767,653; 5,777,514; 5,793,168; 5,798,635; 5,804,950; 5,808,455; 5,811,999;

5,818,207; 5,818,669; 5,825,165; 5,825,223; 5,838,723; 5.844,378; 5,844,941. Japan: 2,598,946; 2,619,299;

2,704,176; 2,821,714. Other patents are pending.

cQ

Micro Linear Corporation

2050 Concourse Drive

San Jose, CA 95131

Tel: (408) 433-5200

Fax: (408) 432-0295

www.microlinear.com