| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
7906 bảng dữ liệu(PDF) 150 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7906 bảng dữ liệu(HTML) 150 Page - Renesas Technology Corp |
|
150 / 531 page ![]() TIMER A 7906 Group User’s Manual Rev.2.0 7-47 [Precautions for pulse width modulation (PWM) mode] 1. Each of timers A3, A5 to A8 is not equipped with the pulse width modulation (PWM) mode. 2. If the count start bit is cleared to “0” during PWM pulse output, the counter stops counting. If the TAjOUT pin outputs “H” level at that time, the output level will become “L” and the timer Aj interrupt request bit will be set to “1.” When the TAjOUT pin outputs “L” level at that time, the output level will not change and no timer Aj interrupt request will occur. 3. When the timer’s operating mode is set by one of the following procedures, the timer Aj interrupt request bit is set to “1.” qWhen the PWM mode is selected after reset qWhen the operating mode is switched from the timer mode to the PWM mode qWhen the operating mode is switched from the event counter mode to the PWM mode Accordingly, when using a timer Aj interrupt (interrupt request bit), be sure to clear the timer Aj interrupt request bit to “0” after the above setting. [Precautions for pulse width modulation (PWM) mode] |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |