| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
7733 bảng dữ liệu(PDF) 274 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 bảng dữ liệu(HTML) 274 Page - Renesas Technology Corp |
|
274 / 940 page ![]() A-D CONVERTER 7733 Group User’s Manual 9–9 (1) Interrupt priority level selection bits (bits 2 to 0) These bits select an A-D conversion interrupt’s priority level. When using A-D conversion interrupts, select one priority level from levels 1 to 7. If an A-D conversion interrupt request occurs, its priority level is compared with the processor interrupt priority level (IPL), and the requested interrupt is enabled only when its priority level is higher than the IPL. (Note that this is applied to the case where the interrupt disable flag (I) = “0.”) When disabling A-D conversion interrupts, set these bits to “0002” (Level 0). (2) Interrupt request bit (bit 3) This bit is set to “1” when an A-D conversion interrupt request occurs. This bit is automatically cleared to “0” when the A-D conversion interrupt request is accepted. Note that this bit can be set to “1” or cleared to “0” by software. 9.2 Block description |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |