| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
7733 bảng dữ liệu(PDF) 700 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 bảng dữ liệu(HTML) 700 Page - Renesas Technology Corp |
|
700 / 940 page ![]() CONNECTING EXTERNAL DEVICES 7735 Group User’s Manual 12–24 A Clock 1 ALE At reading At writing RDE q Determination timing of pin HOLD’s input level A Not determined Determined Word data is accessed by the two bus cycles. (in this case, no wait) A A WW 12.4.1 Operation in hold state _____ When “L” level is input to pin HOLD while the bus is not in use, this signal is accepted at the falling edge _____ of clock φ1. When “L” level is input to pin HOLD while the bus is in use, this signal is accepted at the clock ____ ____ ____ φ1’s falling edge which precedes the rising edge of signal RDE, WEL, or WEH by the clock φ1’s cycle divided by 2. (Refer to Figures 12.4.2 to 12.4.6.) Note that when word data which starts from an odd address is accessed by the two bus cycles, determination is performed only in the second bus cycle. (Refer to Figure 12.4.1.) _____ When “L” level which was input to pin HOLD is accepted, φCPU is stopped at the next rising edge of clock _____ φ1. At this time, pin HLDA outputs “L” level, and so the external is informed that the microcomputer is in _____ ____ ____ the hold state. After one cycle of clock φ1 has passed since pin HLDA’s level becomes “L,” pins RDE, WEL, ____ _____ WEH , CS0 to CS4, RSMP and the external bus enter the floating state. _____ The hold state can be terminated by setting pin HOLD’s level to “H” again. When “H” level is input to pin _____ _____ HOLD , this signal is accepted at the falling edge of clock φ1. When “H” level which was input to pin HOLD _____ is accepted, pin HLDA’s level goes from “L” to “H.” And then, the hold state is terminated after one cycle of clock φ1 has passed. Figures 12.4.2 to 12.4.6 show the timing when the hold state is accepted and terminated. _____ g In the ready state, determination of pin HOLD’s input level is not performed. Fig.12.4.1 Determination when word data which starts from odd address is accessed by the two bus cycles 12.4 Hold function |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |